What are the methods for speed regulation of three-phase AC motors?

Mar 21, 2025

1. Ordinary three-phase squirrel cage type. This motor can only be regulated by changing the power supply frequency and voltage (F/U) through a frequency converter.

 

2. Three-phase wound-rod motors can achieve the purpose of speed regulation by changing the mechanical characteristics of the motor by changing the resistor connected in series to the rotor coil. This method is often used on cranes. The speed regulation of wound-rod motors with high power for a long time does not require resistors in series, because resistors consume a lot of energy. Usually, thyristors are connected in series to control the current by controlling the conduction angle of the thyristors. This is equivalent to changing the resistance in the circuit to achieve the same effect as above. The rotor's electrical energy is rectified by the thyristor group and then inverted and sent back to the grid. This method is called cascade speed regulation. With a good speed control cabinet, it is said to be comparable to the speed regulation of DC motors.

 

3. Multi-pole motors. This motor has one or more windings. By changing the connection method of the winding leads connected to the wiring connection, the number of motor poles can be changed to adjust the speed. The most common 4/2-pole motor uses (angle/double Y) connection.

 

4. Three-phase commutator motor. This is a very old-fashioned speed-regulating motor, which is now very popular. This motor has a complex structure. Its rotor is similar to that of a DC motor, and it also has a commutator and brushes. The relative position of the brushes is changed by a mechanical mechanism, and the electromotive force of the rotor winding is changed to change the current to adjust the speed. This motor uses three-phase current, but strictly speaking, it is actually a DC machine. The principle is a bit like a series DC machine.

 

5. Slip speed regulator. This method does not actually change the motor speed. Instead, it changes the clutch degree of the slip clutch connected to the motor shaft and changes the speed of the clutch output shaft to adjust the speed. There are also such as silicone oil clutch, magnetic powder clutch, etc., a clutch mechanical device and a three-phase motor are matched to use for speed regulation. Strictly speaking, it is not a three-phase motor adjustment method. However, many textbooks often count them as a speed regulation method and a method.